Tractor-Size › John Deere › 5050 D GearPro LiftPro 4WD
John Deere

John Deere 5050 D GearPro LiftPro 4WD tire size

Factory tire pairs for the John Deere 5050 D GearPro LiftPro 4WD (50 HP, 4WD):

  • 50 HP
  • 4WD
Rear15.9-28Front9.5-20
4WD
Rear
15.9-28
Outside dia.
≈1,398mm
Width
404mm
Rim
28″
No radial equivalent
Front
9.5-20
Outside dia.
≈918mm
Width
241mm
Rim
20″
radial equivalent: 9.5R20
9.5R20
Outside dia.
940mm
Width
241mm
Rim
20″
Original bias-ply: 9.5-20

The tires on the tractor may not be original. A different size from the factory one can damage the transmission, especially on 4WD.

What do the John Deere 5050 D GearPro LiftPro 4WD tyre sizes mean?

15.9-28 is an inch-sized tyre: section width about 15.9 inches, rim diameter 28 inches. The dash (-) marks bias (cross-ply) construction.

9.5-20 is an inch-sized tyre: section width about 9.5 inches, rim diameter 20 inches. The dash (-) marks bias (cross-ply) construction.

2 other John Deere models use the same rear size (15.9-28).

Read more: How to read a tyre size · 4WD front–rear tyre ratio · Tractor tyre pressure

Related guides

Also written as: John Deere 5050DGearProLiftPro4WD · John Deere 5050-D-GearPro-LiftPro-4WD

Take it to your tire shop: tractor-size.com

4WD ratio check and other tools →

Source: tractorkarvan.com

FAQ

What is the front tire size of the John Deere 5050 D GearPro LiftPro 4WD?

The John Deere 5050 D GearPro LiftPro 4WD comes from the factory with 9.5-20 front tires.

What is the rear tire size of the John Deere 5050 D GearPro LiftPro 4WD?

The John Deere 5050 D GearPro LiftPro 4WD comes from the factory with 15.9-28 rear tires.

Can I fit a different tire size on the John Deere 5050 D GearPro LiftPro 4WD?

Equivalent sizes with a very close outside diameter can be fitted (e.g. the radial equivalent). On 4WD, a changed front/rear ratio can damage the driveline, so check it with the 4WD ratio tool first.

Other John Deere models

All makes

⚠️ Is this size wrong? Report it
Was this useful?Can't find your model or size? Tell us and we'll add it →